RZR XP Turbo -'17-Up

Are you looking for the most bada** XPT products on the market? Look no further! We suggest starting with our tuning which was developed in our state-of-the-art Superflow 902 dyno center, testing on our Mustang wheel dyno, and perfected in the trails and dunes. We use the Bully Dog GT to load our custom tunes into your ECU which makes things easy! This GT (gauge tuner) allows you to store and tune multiple different tunes (pump fuel, race fuel, valet.. etc), while having helpful gauges and being able to data log many parameters. This is hands down the best device for tuning your machine. The next crucial steps are clutching and exhaust. Clutching helps keep your motor in its peak powerband and better help transfer that additional power to the wheels. Our exhaust helps the heat escape and gain another 4-5 HP depending on boost levels. A billet diverter valve is highly recommended in place of the factory plastic unit which is known to prematurely fail. Our aluminum charge tube kits lower boost temps and provide more airflow without the chance of cracking like the factory piece. Our #1 recommendation is to start with the Stage 1 Bolt-On Performer Kit. This includes 2 tunes and all the key components to make your XP Turbo a complete monster!
Position
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 49 total

  1. 1
  2. 2
  1. HOT
    BMP 2016-Up RZR XP Turbo Slip-On Double Barrel Exhaust RZR XP Turbo Slip-On Exhaust

    BMP 2016-Up RZR XP Turbo Slip-On Double Barrel Exhaust

    $449.95
    • Fits 2016-Up Polaris RZR XP Turbo Models
    • A must-have for any tuned XP turbo! Works great with stock machines also
    • Drastically reduces heat buildup allowing you to run more boost without detonation or safety parameters de-tuning
    • Gains 3-5 horsepower depending on boost pressure
    • Ceramic coated for a durable, great looking finish that holds in heat
    • The black heat shield provides heat protection and great looks
    • One of the best sounding exhausts on the market
    • Easily adjust sound levels with our quiet cap and/or spark arrestors
    • Accepts your factory spark arrestor
    • Due to the high flow design, quiet cap does not lose any horsepower
    • Looking for an additional spark arrestor? ClickHEREto purchase one.
    • Purchase the optional quiet capHERE
    • Ceramic Black Part #: 17-312-CB
    • Ceramic Chrome Part #: 17-312-C
  2. HOT
    BMP 2017-Up RZR XP Turbo Stage 1 Bolt-On Performer Kit BMP 2017-Up RZR XP Turbo Stage 1 Bolt-On Performer Kit

    BMP 2017-Up RZR XP Turbo Stage 1 Bolt-On Performer Kit

    $1,345.00
    • Kit fits all 2017-Up RZR XP Turbo Models
    • One easy kit that produces the most horsepower in the industry on the stock injectors and stock turbo!
    • HUGE horsepower and torque gains (up to 20 RWHP over stock)
    • Wicked acceleration and top speed
    • Torque limiters are removed
    • Higher boost in low range
    • Speed limit raised to 96 MPH (Normal MPH is 90-95 with this kit)
    • Rev limit is raised to 9200 RPM
    • Fan on/off at 185 degrees
    • 2 Foot speed & RPM limiters are removed
    • No overboost codes
    • Developed in our state of the art dyno facility and perfected in the real world
    • Our custom tunes loaded on your ECU with the Bully Dog GT (No sending in your ECU!)
    • Easily switch between tunes or program back to stock in under 5 minutes
    • Bully Dog GT can be used for gauges displaying boost, intake temp, boost temp... etc. but does not need to be mounted
    • GT can also be used for data logging, performance tests, reading trouble codes & more
    • Amazing sounding exhaust that adds horsepower and removes a huge amount of heat
    • Exhaust features two outlets for adjustable sound: Wide open, 1 open 1 quiet cap, 1 quiet cap 1 spark arrestor, or 2 spark arrestors (Quiet cap and spark arrestors sold separately)
    • Exhaust is ceramic coated for a durable heat resistant coating complete with a heat shield which reduces muffler heat output
    • Magnetic adjustable weights are very easy to use and offer a far superior design which puts more power to the wheels
    • Kit Includes: BMP Full Velocity Double Barrel Exhaust, Bully Dog GT loaded with 2 BMP custom tunes ($50 per tune after the two included), Billet Diverter Valve, and a BMP Stage 1 clutch kit with setup sheet.
    • View or download the Bully Dog GT instructionsHERE
    • View or download the weight setup sheetHERE
    • Purchase the optional Quiet CapHERE
    • Purchase spark arrestorsHERE (Factory spark arrestor will work in our exhaust)
    • Part #: 15-322-1
  3. HOT
    BMP 2016-Up Polaris RZR XP Turbo Full Stainless Steel Big Mo Exhaust BMP 2016-Up Polaris RZR XP Turbo Full Stainless Steel Big Mo Exhaust

    BMP 2016-Up Polaris RZR XP Turbo Full Stainless Steel Big Mo Exhaust

    $995.00
    • Fits all '16-Up Polaris RZR XP Turbos
    • BMP stainless steel full exhaust - designed, built and assembled in 'Merica
    • Unlike most companies, we designed developed and built our own muffler from the ground up to offer a completely unique product for our customers. Not some outsourced china made repeat from the 90's
    • Aluminum Extruded body anodized black
    • 6061 fully machined billet aluminum components
    • Stainless steel spiral formed luver core
    • Coarse Stainless steel American made energon depleted decepticon pube packing material
    • Rigid v-band ensures a tight, leak proof fitting between the pipe and muffler
    • Stainless steel hardware for long-lasting aesthetics (even the black coated bolts are stainless steel)
    • Big horsepower and torque gains at low to mid range power
    • Decreases turbo lag
    • Turbo runs cooler (lower EGT) leading to increased longevity of turbo and exhaust valves
    • Designed in our state of the art UTV performance center
    • Compatible with sound-reducing "Whisper Biscuit" HERE
    • Compatible with 90° Turn-Out HERE
    • Compatible with spark arrestor HERE
    • PN: 08-313
  4. BMP RZR XP TURBO BIG MO SLIP-ON EXHAUST BMP RZR XP TURBO BIG MO SLIP-ON EXHAUST

    BMP RZR XP TURBO BIG MO SLIP-ON EXHAUST

    $650.00
    • Fits all '16-up XP Turbo Models
    • BMP stainless steel slip-on exhaust - designed, built and assembled in the 'Merica
    • Designed in our state of the art UTV performance center
    • Unlike most companies, we designed developed and built our own muffler from the ground up to offer a completely unique product for our customers. Not some outsourced china made repeat from the 90's
    • Aluminum Extruded body anodized black
    • 6061 fully machined billet aluminum components
    • Stainless steel spiral formed luver core
    • Coarse Stainless steel American made energon depleted decepticon pube packing material
    • Rigid v-band ensures a tight, leak proof fitting between the pipe and muffler
    • Stainless steel hardware for long-lasting aesthetics (even the black coated bolts are stainless steel)
    • Compatible with sound-reducing "Whisper Biscuit" HERE
    • Compatible with 90° Turn-Out HERE
    • Compatible with spark arrestor HERE
    • PN: 17-318
  5. HOT
    BMP 2017-UP RZR XP TURBO BIG MO STAGE 1 BOLT-ON PERFORMER KIT BMP 2017-UP RZR XP TURBO BIG MO STAGE 1 BOLT-ON PERFORMER KIT

    BMP 2017-UP RZR XP TURBO BIG MO STAGE 1 BOLT-ON PERFORMER KIT

    $1,575.00
    • Kit fits all 2017-Up RZR XP Turbo Models
    • BMP stainless steel full exhaust - designed, built and assembled in 'Merica
    • Unlike most companies, we designed developed and built our own muffler from the ground up to offer a completely unique product for our customers. Not some outsourced china made repeat from the 90's
    • Aluminum Extruded body anodized black
    • 6061 fully machined billet aluminum components
    • Stainless steel spiral formed luver core
    • Coarse Stainless steel American made energon depleted decepticon pube packing material
    • Rigid v-band ensures a tight, leak proof fitting between the pipe and muffler
    • Stainless steel hardware for long-lasting aesthetics (even the black coated bolts are stainless steel)
    • One easy kit that produces the most horsepower in the industry on the stock injectors and stock turbo!
    • HUGE horsepower and torque gains (up to 20 RWHP over stock)
    • Wicked acceleration and top speed
    • Torque limiters are removed
    • Higher boost in low range
    • Speed limit raised to 96 MPH (Normal MPH is 90-95 with this kit)
    • Rev limit is raised to 9200 RPM
    • Fan on/off at 185 degrees
    • 2 Foot speed & RPM limiters are removed
    • No overboost codes
    • Developed in our state of the art dyno facility and perfected in the real world
    • Our custom tunes loaded on your ECU with the Bully Dog GT (No sending in your ECU!)
    • Easily switch between tunes or program back to stock in under 5 minutes
    • Bully Dog GT can be used for gauges displaying boost, intake temp, boost temp... etc. but does not need to be mounted
    • GT can also be used for data logging, performance tests, reading trouble codes & more
    • Amazing sounding exhaust that adds horsepower and removes a huge amount of heat
    • Exhaust features two outlets for adjustable sound: Wide open, 1 open 1 quiet cap, 1 quiet cap 1 spark arrestor, or 2 spark arrestors (Quiet cap and spark arrestors sold separately)
    • Magnetic adjustable weights are very easy to use and offer a far superior design which puts more power to the wheels
    • Kit Includes: BMP Full Velocity Big Mo Exhaust, Bully Dog GT or Power Vision loaded with 2 BMP custom tunes ($50 per tune after the two included), Billet Diverter Valve and BMP Stage 1 clutch kit with setup sheet
    • View or download the Bully Dog GT instructions HERE
    • View or download the weight setup sheetHERE
    • Compatible with sound-reducing "Whisper Biscuit"HERE
    • Compatible with 90° Turn-OutHERE
    • Compatible with spark arrestorHERE
    • Part #: 15-326-1
  6. HOT
    SALE
    BMP Programmed Power Vision CX for 2017-Up RZR XP Turbo (E85)

    BMP Programmed Power Vision CX for 2017-Up RZR XP Turbo (E85)

    $450.00

    $500.00

    As low as: $50.00

    DynoJet Power Vision CX Tuner with BMP Custom Tuning for all 2017-Up Polaris RZR XP Turbo models

    Device Features:

    • Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU
    • Display vehicle data channels in real-time
    • Weather resistant for use in all conditions
    • High contrast display, visible in direct sunlight

     

    BMP Performance Tunes:

    • Fueling revised for maximum power and torque - extreme horsepower gains with our highly advanced custom tuning!
    • Rev limit raised in high and low gears to 9000 RPM
    • Speed limit raised in high and low gears to 96 MPH
    • Torque limiting functions reduced or eliminated
    • Throttle limiters eliminated
    • Revised drive-by-wire throttle profiles for high and low gears
    • Lower fan turn-on temps of 183 degrees
    • Seat belt limiter disabled
    • Left foot brake mode enabled
    • No overboost codes
    • Retains ADC and Turf mode where applicable
    • Boost control for Turbo models
  7. HOT
    The Whisper Biscuit The Whisper Biscuit

    The Whisper Biscuit

    $34.95
    • Noise-reducing disc for Big Mo Exhaust systems
    • Helps reduce DBs on the trail
    • Fits all our Big Mo's, and the X3 and YXZ Full Systems
    • Compatable with our 90 Degree turn-outs HERE
    • Compatible with Spark Arrestor HERE
    • Maintain back pressure on N/A's with stock tunes
    • Achieves semi-anechoic, physical accoustic attenuation through rigid body absorbtion causing the suppression of longitudinal waves by precise, transverse conversion.
  8. BMP RZR XP Turbo / RS1 "CYCLONE" Billet Aluminum Primary Clutch Cover BMP RZR XP Turbo / RS1 "CYCLONE" Billet Aluminum Primary Clutch Cover

    BMP RZR XP Turbo / RS1 "CYCLONE" Billet Aluminum Primary Clutch Cover

    $199.99

    Features

    • Decreases belt temp, prolonging belt life
    • About 25 CFM above stock down low
    • Up to 50 CFM above stock at full shift-out
    • Constant cooling, direct on the primary clutch
    • Billet aluminum construction, built to last
    • Designed and built at our state of the art facility here in the USA
    • Part #: 20-CYCLONE-1
  9. RZR o2 Sensor Blockoff Kit

    BMP RZR O2 Sensor Blockoff Kit

    $39.95
    • Fits all 12mm O2 sensors found on Many RZR & Ranger models
    • Use this kit for 2017-Up Ranger 1000, 2018-Up RZR XP 1000, 2017-Up Ranger Crew XP 900, 2018-Up RZR RS1
    • Eliminates your narrow band O2 sensor
    • Normally used with performance exhausts
    • Easy Installation
    • Comes with sensor block-off resistor plug, bung cap, and crush washer
    • Part #: 17-SB-2-KIT
  10. HOT
    BMP RZR XP Turbo Race Pipe

    BMP RZR XP Turbo Race Pipe

    $349.95
    • Super low back-pressure
    • Quicker spool times
    • Less exhaust valve heat
    • Make more power
    • All stainless steel construction
    • Designed in our state of the art UTV Performance Center
    • Built in 'Murica
  11. HOT
    BMP Girls 2019 Shop Calendar BMP Girls 2019 Shop Calendar

    BMP Girls 2019 Shop Calendar

    $20.00
    • 16 Month BMP Girls Calendar 
  12. BMP Tune Upgrade Options for Power Vision CX (E85)

    BMP Tune Upgrade Options for Power Vision CX (E85)

    $50.00
    • Tune upgrades require basic knowledge of computers to do via e-mail.  BMP does not provide tech help on basic computer knowledge. If you are not comfortable with downloading a file from an e-mail and transferring it to your SD card, we ask that you send us your GT with the SD card installed.
    • See our instructional video on the PVCX and how to update HERE
    • Upgrade 1: Same ECU S/N PVCX was originally purchased for tune upgrade fee (Example: Upgrade from level 1 to level 2) - $50
    • Upgrade 2: Upgrading to a Bikeman Tune for a PVCX not originally purchased from Bikeman. -$100
    • If using upgrade 1 or 2 you must have the serial number found on the PVCX itself along with the name of who originally purchased the PVCX.  We will match these up with our records.
  13. BMP Tune Upgrade Options for Power Vision CX

    BMP Tune Upgrade Options for Power Vision CX

    $50.00
    • Tune upgrades require basic knowledge of computers to do via e-mail.  BMP does not provide tech help on basic computer knowledge. If you are not comfortable with downloading a file from an e-mail and transferring it to your SD card, we ask that you send us your GT with the SD card installed.
    • See our instructional video on the PVCX and how to update HERE
    • Upgrade 1: Same ECU S/N PVCX was originally purchased for tune upgrade fee (Example: Upgrade from level 1 to level 2): $50
    • Upgrade 2: Upgrading to a Bikeman Tune for a PVCX not originally purchased from Bikeman: $150 ($50 for tune + $100 one-time fee)
    • If using upgrade 1 or 2 you must have the serial number found on the PVCX itself along with the name of who originally purchased the PVCX.  We will match these up with our records.
  14. HOT
    BMP 2017-UP RZR XP TURBO BIG MO STAGE 2 BOLT-ON PERFORMER KIT BMP 2017-UP RZR XP TURBO BIG MO STAGE 2 BOLT-ON PERFORMER KIT

    BMP 2017-UP RZR XP TURBO BIG MO STAGE 2 BOLT-ON PERFORMER KIT

    $1,920.00
    • Kit fits all 2017-Up RZR XP Turbo Models
    • Designed, built and assembled in 'Merica
    • Unlike most companies, we designed developed and built our own muffler from the ground up to offer a completely unique product for our customers. Not some outsourced china made repeat from the 90's
    • Aluminum Extruded body anodized black
    • 6061 fully machined billet aluminum components
    • Stainless steel spiral formed luver core
    • Coarse Stainless steel American made energon depleted decepticon pube packing material
    • Rigid v-band ensures a tight, leak proof fitting between the pipe and muffler
    • Stainless steel hardware for long-lasting aesthetics (even the black coated bolts are stainless steel)
    • One easy kit that produces the most horsepower in the industry on the stock injectors and stock turbo!
    • HUGE horsepower and torque gains (up to 20 RWHP over stock)
    • Wicked acceleration and top speed
    • Torque limiters are removed
    • Higher boost in low range
    • Speed limit raised to 96 MPH (Normal MPH is 90-95 with this kit)
    • Rev limit is raised to 9200 RPM
    • Fan on/off at 185 degrees
    • 2 Foot speed & RPM limiters are removed
    • No overboost codes
    • Developed in our state of the art dyno facility and perfected in the real world
    • Our custom tunes loaded on your ECU with the Bully Dog GT (No sending in your ECU!)
    • Easily switch between tunes or program back to stock in under 5 minutes
    • Bully Dog GT can be used for gauges displaying boost, intake temp, boost temp... etc. but does not need to be mounted
    • GT can also be used for data logging, performance tests, reading trouble codes & more
    • Amazing sounding exhaust that adds horsepower and removes a huge amount of heat
    • Magnetic adjustable weights are very easy to use and offer a far superior design which puts more power to the wheels
    • Kit Includes: BMP Full Big Mo Exhaust System, Bully Dog GT or Power Vision loaded with 2 BMP custom tunes ($50 per tune after the two included), Billet Diverter Valve and BMP Stage 2 clutch kit with setup sheet
    • View or download the Bully Dog GT instructionsHERE
    • View or download the weight setup sheetHERE
    • Compatible with sound-reducing "Whisper Biscuit"HERE
    • Compatible with 90° Turn-OutHERE
    • Compatible with spark arrestorHERE
    • Part #: 15-326-2
  15. HOT
    The Whisper Biscuit Kit The Whisper Biscuit Kit

    The Whisper Biscuit Kit

    $49.95
    • Noise-reducing disc for Big Mo Exhaust systems
    • Helps reduce DBs on the trail
    • Fits all our Big Mo's, and the X3 and YXZ Full Systems
    • Compatable with our 90 Degree turn-outs HERE
    • Compatible with Spark Arrestor HERE
    • Maintain back pressure on N/A's with stock tunes
    • Achieves semi-anechoic, physical accoustic attenuation through rigid body absorbtion causing the suppression of longitudinal waves by precise, transverse conversion.
    • Comes with mounting bracket and three screws
  16. RZR XP Turbo Turbocharger Rebuild Kit

    RZR XP Turbo Turbocharger Rebuild Kit

    $299.95
    • '16-Up RZR XP Turbo Turbocharger Rebuild Kit
  17. S&B PARTICLE SEPARATOR FOR 2016-2018 POLARIS RZR XP TURBO S&B PARTICLE SEPARATOR FOR 2016-2018 POLARIS RZR XP TURBO

    S&B PARTICLE SEPARATOR FOR 2016-2018 POLARIS RZR XP TURBO

    $399.99
    • Protect air filter and engine from dust
    • Ejects 94% of the dust before it reaches your filter
    • Fits all 2016-18 Polaris RZR XP Turbo models
    • Installs easy with included mounting hardware
    • Can be mounted almost anywhere
    • 94% Efficiency Rating
    • 3.1 amps Amp Draw
    • 1.75" Clamp Diameter
    • 39" Duct Length
    • 20.2" W X 10.5" H X 10" D Dimensions
  18. Razorback Technology - Infrared Belt Temp Gauge (3.0) Razorback Technology - Infrared Belt Temp Gauge (3.0)

    Razorback Technology - Infrared Belt Temp Gauge (3.0)

    $295.00
    • LCD Screen - Easy to see, even when the sun is bearing down overhead.
    • LED Alerts - The incorporated LED has been programmed to change colors as your belt reaches certain temperatures. Default settings are Green at less than 200 F. Yellow at 200 F. Red at 225 F. Red Strobe at 245 F. Fast Red Strobe at greater than 260 F. For maximum belt life, try to avoid temperatures in excess of 200-225 F.
    • Machined from steel and aluminum. Not plastic.
    • Waterproof sensor. Waterproof connections.
    • Quick-Release Sensor
  19. Energycoil On-Plug Race-Spec Ignition Coil Kit for Polaris UTVs Energycoil On-Plug Race-Spec Ignition Coil Kit for Polaris UTVs

    Energycoil On-Plug Race-Spec Ignition Coil Kit for Polaris UTVs

    $389.99
    • Increased horsepower
    • Increased torque
    • Improved throttle response
    • Improved fuel efficiency
    • Direct OEM replacement
    • Made in USA
  20. DAYCO® XTX™ ATV BELT

    DAYCO® XTX™ ATV BELT

    $129.99
      The Dayco XTX ATV belt offers:
    • Faster and more consistent throttle response at high speeds
    • Quicker throttle response at mid-speed acceleration
    • Greater secondary acceleration at high RPMs
    • Reduction in slippage during the highest levels of torque
    • Increased horsepower capacity
    • Better performance during deceleration (more responsive engine braking)
    • Tested and proven reliable at well over 12,000 RPMs
    • Cooler running than the leading competitors

    This race-tested Dayco XTX belt gives extreme riders the best out-of-the-hole acceleration, throttle response and durability for the ride of a lifetime—every time!

  21. Big Mo Exhaust 90° Turn-Out Big Mo Exhaust 90° Turn-Out

    Big Mo Exhaust 90° Turn-Out

    $50.00
    • Diverts cab resonance
    • Compatible with spark arrester HERE
    • Also compatible with our whisper biscuit HERE
    • (Muffler not included)
    • Part#: 17-ET-1-SS
  22. BMP 2017-Up RZR XP Turbo Stage 1 Clutch Kit

    BMP 2017-Up RZR XP Turbo Stage 1 Clutch Kit

    $280.00
    • Fits All 2017-Up RZR XP Turbo Models
    • Works well on stock or modified RZRs
    • Simply a must-have for tuned RZRs
    • Gain top speed over the stock clutching
    • Much better power transfer than the stock weights
    • Spring holds much better tension on the belt than factory
    • Quicker backshifting when on and off the throttle
    • More responsive feel
    • Weights adjustable with magnets from 66-82
    • Kit Includes: BMP magnetic adjustable weights, BMP primary spring, BMP secondary spring & a setup guideline
    • View or download the weight setup sheetHERE
    • Part #:  07-321-1
  23. HOT
    SALE
    BMP 2017-Up RZR XP Turbo Stage 2 Clutch Kit

    BMP 2017-Up RZR XP Turbo Stage 2 Clutch Kit

    $400.00

    $420.00

    • Fits All 2017-Up RZR XP Turbo Models
    • Works well on stock or modified RZRs
    • Simply a must-have for tuned RZRs
    • Gain top speed over the stock clutching
    • Much better power transfer than the stock weights
    • Springs hold much better tension on the belt than factory
    • Quicker backshifting when off the throttle
    • More responsive feel
    • Less belt slip resulting in longer belt life
    • Longer clutch life
    • Weights adjustable with easy to use magnets from 66-82 Grams
    • Kit Includes: BMP magnetic adjustable weights, primary spring, secondary spring, custom cut helix & a setup guideline
    • View or download the weight setup sheetHERE
    • Part #:  07-321-2
  24. TURBOSMART 25MM DIVERTER VALVE

    TURBOSMART 25MM DIVERTER VALVE

    $150.00
    • Top brand in turbo parts and accessories
    • Brass Piston
    • High Quality Billet Aluminum Construction
    • Replaces plastic stock diverter valve
    • Recirculates into your intake
    • Vent to atmosphere kit compatible find itHERE
    • View or download the instruction sheetHERE.
    • Part#: 16-314
  25. HOT
    BMP Turbo Mod for '16-Up Polaris XP Turbo BMP Turbo Mod for '16-Up Polaris XP Turbo

    BMP Turbo Mod for '16-Up Polaris XP Turbo

    $600.00
    • BMP billet compressor wheel is 10% larger while being almost 25% lighter than the factory wheel
    • Quicker spool time means faster throttle response
    • Higher achievable boost with lower temps
    • Increased turbo longevity
    • Compatible with any BMP tune
    • Direct bolt-on, no additional modifications required
    • All work is performed to your turbo, no exchange available.
    • Requires your turbo and wastegate assembly to be shipped to our Wisconsin facility
    • Your turbo is inspected before modification and we will recommend repairs if needed (additional cost if repairs needed)

     

    PN: 10-301

Position
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 49 total

  1. 1
  2. 2