XP 600 SDI

Position
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 52 total

  1. 1
  2. 2
  3. 3
  1. HOT
    SALE
    BMP Girls 2018 Shop Calendar BMP Girls 2018 Shop Calendar

    BMP Girls 2018 Shop Calendar

    $10.00

    $20.00

    • 14 Month BMP Girls Calendar 
  2. The SideKick

    The SideKick

    $130.00

    The SideKick is manufactured of steel and zinc plated to prevent corrosion. These stands are sturdy enough to get any job done, light enough to carry on the road, and nice enough to be an addition for any show display. The SideKick is designed for newer models of different manufactured branded sleds.

    *The SideKick should not be used on four-stroke motors.

    The SideKick is sold as a two component kit that consists of one steering post and one bumper post. The posts are not sold individually.

  3. HOT
    TRA Primary Retainer Clips

    TRA Primary Retainer Clips

    $19.95
    • A must for every Ski-Doo owner!
    • This handy tool holds buttons in place when changing your weights or springs.
    • Ensures that the buttons remain in place in the governor cup of the TRA primary clutch during disassembly and reassembly (set of 3)
    • P/N: TP-930207
  4. DAYCO® XTX™ SNOWMOBILE BELT

    DAYCO® XTX™ SNOWMOBILE BELT

    $129.99
      The Dayco XTX snowmobile belt offers::
    • Faster and more consistent throttle response at high speeds
    • Quicker throttle response at mid-speed acceleration
    • Greater secondary acceleration at high RPMs
    • Greater secondary acceleration as primary acceleration increases
    • Reduction in slippage during the highest levels of torque
    • Providing more power to track
    • Better performance during deceleration (more responsive engine braking)
    • Tested and proven reliability at well over 12,000 RPMs
    • Cooler-running temperature than the leading competitors

    This race-tested Dayco XTX belt gives extreme riders the best out-of-the-hole acceleration, throttle response and durability for the ride of a lifetime—every time!

  5. PDP - Snow Flap for Ski-Doo XP/ XR (2008-Up)

    PDP - Snow Flap for Ski-Doo XP/ XR (2008-Up)

    $39.99
    • Made from a Low-Density Polyethylene
    • Extra durable for temps of -60° F under stress!
    • Screen printed, NOT A CHEAP STICKER.
    • UV protective ink guaranteed to last.
    • Direct OEM Replacement
  6. PDP - Snow Flap for Ski-Doo XM/ XS (2013-Up)

    PDP - Snow Flap for Ski-Doo XM/ XS (2013-Up)

    $39.99
    • Made from a Low-Density Polyethylene
    • Extra durable for temps of -60° F under stress!
    • Screen printed, NOT A CHEAP STICKER.
    • UV protective ink guaranteed to last.
    • Direct OEM Replacement
  7. REV/E-Tec/SDI 600 Performance Manifold Black

    BMP REV/E-Tec/SDI 600 Performance Manifold

    $199.95

    Rev 600 Performance Manifold Fits all 600 Rev, Rev XP, SDI & E-Tec Models 03-Current.

     

    If you would like EGT bungs please call. Please note that if you choose for us to install EGT bungs expect a 1 week delay for black finishes or 2-3 week delay for ceramic finishes.

     Need new exhaust springs? 1.8" springs / 2.5" springs

    Black PN: 03-212

    Ceramic PN: 03-212-C

  8. Ski-Doo Pipe Mod

    BMP Ski-Doo Pipe Mod

    $250.00
    • Send in your stock pipe for our classic pipe mod!
    • Big gains for the money
    • Excellent gains in horsepower and torque
    • No EFI controller is normally required
    • Normally you want to add 1-2 grams heavier clutch weight or use one of our stage 2 kits for optimum performance
    • Pipe is sand blasted then re-painted. You may choose to have the pipe ceramic coated also.
    • 2-3 week turnaround time
    • Must remove all heat shielding
    • Either print a copy of your online receipt, or send in a copy of this Work Order Form.
    • Send it to: Bikeman Performance Plus 920 Pine Street Saint Croix Falls, WI 54024
    • Need new exhaust springs? 1.8" springs / 2.5" springs
  9. BMP 2011-Up E-Tec 800, 2009-Up E-Tec 600 Full Velocity Muffler BMP 2011-Up E-Tec 800, 2009-Up E-Tec 600 Full Velocity Muffler Black

    BMP 2011-Up E-Tec 800, 2009-Up E-Tec 600 Full Velocity Muffler

    $269.95
    • Fits all 2011-Up E-Tec 800 & 2009-Up E-Tec 600 models
    • Also fits the 2008 XP chassis 600 SDI model
    • Excellent sound without being too loud
    • 9 lbs lighter than stock!
    • Gains 2 HP
    • Dyno and field tested to ensure the best possible performance
    • Black PN: 02-222
    • Ceramic PN: 02-222-C

     

     

  10. HOT
    BMP 2011-Up E-Tec 800, 2009-Up E-Tec 600 Powder Lite Muffler E-Tec 600/800 Powder Lite Muffler Black

    BMP 2011-Up E-Tec 800, 2009-Up E-Tec 600 Powder Lite Muffler

    $269.95
    • Fits all 2011-Up E-Tec 800 & 2009-Up E-Tec 600 models
    • Also fits the 2008 XP chassis 600 SDI model
    • Excellent sound
    • Only weighs 4 lbs
    • Gains 2 HP
    • Dyno and field tested to ensure the best possible performance
    • No returns due to loud or undesirable sound.
    • Black PN: 02-222PL
    • Ceramic PN: 02-222PL-C

     

  11. 1.8 Inch Exhaust Spring - 5 Pack

    BMP 1.8 Inch Exhaust Spring - 5 Pack

    $5.00
    • 1.8" Springs work in many applications
    • Recommended for anyone installing exhaust parts on a machine over 1 year old
    • Stealth black.... why not have a cool looking exhaust spring?
    • Ideal for ATV & UTV exhaust, snowmobile mufflers & pipes
    • Part #: BMP-ES1
  12.  2.5 Inch Exhaust Spring - 5 Pack

    BMP 2.5 Inch Exhaust Spring - 5 Pack

    $5.00
    • 2.5" Springs work in many applications
    • Recommended for anyone installing exhaust parts on a machine over 1 year old
    • Stealth black.... why not have a cool looking exhaust spring?
    • Ideal for ATV & UTV exhaust, snowmobile mufflers & pipes
    • This spring is mostly used between your snowmobile y-pipe and single pipe
    • Part #: BMP-ES2
  13. Ultimate Exhaust Spring Puller

    BMP Ultimate Exhaust Spring Puller

    $39.95
    • BMP Ultimate exhaust spring puller should be in every toolbox!
    • 27" in legth to reach even the toughest springs
    • Hardened tip for long tool life
    • Zinc coated
    • Same tool used by our exhaust specialists for years now!
    • Designed to be used for pushing and pulling springs
    • Part #: BMP-USP
  14. Ski-Doo 600 XP/XM/XS Stage 2 Smooth Shift Clutch Kits 2008-Up

    BMP 2008-Up Ski-Doo 600 XP/XM/XS Stage 2 Smooth Shift Clutch Kits

    $299.95
    • These kits fit all E-Tec 600 models 2009 to present. Please select your exact model below.
    • Much quicker acceleration.
    • Holds RPM much better.
    • Gain track speed in the mountains.
    • Reduced clutch heat.
    • Much smoother clutch shifting which helps all around performance.
    • Clutch kits include: Primary spring, adjustable pin kit, smooth shift teflon washers, secondary spring, and a custom angle helix.
    • Add BMP Quick Clickers for easy on-trail adjustment to keep your machine at its peak RPM at all times. 
    • Purchase a primary clutch puller HERE
  15. Ski-Doo Models Primary Clutch Puller

    Primary Clutch Puller for Ski-Doo TRA Models

    $49.95
    • Heavy duty clutch puller much stronger than many others on the market
    • Fits most Ski-Doo TRA models 1998 and newer
    • Will work with 583 and some other fan cooled motors
    • Will work with P Drive clutches
    • Part #: MB-10064
  16. Oil Sleeve Oil Sleeve

    Oil Sleeve

    $19.95

    The Oil Sleeve is designed to stop oil from leaking out of the oil cap due to a warped reservoir neck. The Oil Sleeve installs easily into place. Slight heating of the reservoir neck with a heat gun may be required to install the Oil Sleeve.

     

    Fits: Ski Doo XP, Rev, ZX, CK, F and S chassis; Arctic Cat Crossfire, M-Series and Sno Pro Chassis; Polaris Edge, IQ, RMK, SKS, Switchback, Rush, Indy, Fusion, Evolved and Aggressive Chassis.

     

    Part #: BMP-OS

  17. 600 SDIBoyesen Ski-Doo Rage Cages '04-07

    Boyesen Ski-Doo Rage Cages for 04-07 600 SDI

    $329.95

    Now all Boyesen Rage Cages for Ski-Doo models including the 800R's include the entire intake boot. This is great for those pesky stock intake boots that crack, and have the potential to burn down your motor. Get ride of them all together while gaining performance with these Boyesen Rage Cages!

     

    Most models gain a ton of bottom to mid-range punch and 2-3 peak horsepower and much more crisp throttle response. 

     

    Part Number: '04-07 600 SDI PN: BY-RAD86-2

  18. Ski-Doo E-Tec 600, Rev XP 600 SDI V-Force Reed Valve System

    V-Force Reed Valve System for Ski-Doo E-Tec 600, Rev XP 600 SDI

    $319.95
    • Fits All E-Tec 600 & XP 600 SDI Models
    • Double the reed tip surface over a conventional reed valve design
    • Increased bottom end, stronger mid-range and longer top-end
    • Greater efficiency due to reduced reed petal travel
    • More airflow means more horsepower
    • Reduced reed petal wear
    • Screw free design eliminates risk of screws going through motor
    • Screw free design enables super quick reed petal changes
    • Part #: VF-V3127-873A-2
  19.  Professional 2 Stroke Cylinder Porting

    BMP Professional 2 Stroke Cylinder Porting

    $350.00

    BMP Professional Cylinder Porting - Price per cylinder

    If purchasing online please send a printed copy of your invoice with your cylinders and exhaust valves. If you order other parts with your porting, your order will be sent as soon as your cylinders are completed unless you specify otherwise.

    Use this Work Order Form when sending us parts.

     

    • Accurately precise, highest quality hand porting in the industry
    • Over 30 years of experience
    • Pump gas reliable trail porting
    • Proven race porting
  20. Wossner 2-Stroke Snowmobile Piston Kits

    Wossner 2-Stroke Snowmobile Piston Kits

    $99.95

    ***Please select drop down menu for accurate pricing****

     

    Wossner pistons are German made to the highest standards in the industry! Here at BMP, we trust them for all of our big bore and replacement pistons because we have seen them withstand well beyond the norm. We believe these are truly the best forged piston on the market, and so will you! Please select your model from the drop down list for accurate pricing.

     

    Most piston kits include 1 piston, 1 wristpin, circlips, and rings. For twin motors order Qty 2, for triples order Qty 3.

     

    Actual piston kit may differ from the picture. Looking for gaskets? BMP Sells Cometic top end gasket kits which can be found under your model snowmobile, or the "engine kits" section. 

  21. Ski-Doo Link Belt Silent Chains

    Ski-Doo Link Belt Silent Chains

    $99.95
    High quality link belt silent chains 13 wide. ***Chains are normally not a stocked item and may cause a 2-3 day delay in your order shipping***
  22. Ski-Doo XP Bottom Sprockets

    Ski-Doo XP Bottom Sprockets

    $89.95
    High quality XP Bottom sprockets. Fits all XP chassis sleds including 4-Tec. ***Sprockets sometimes may cause a 2-3 day delay in shipping***
  23. Ski-Doo 13 Wide Top Sprockets

    Ski-Doo 13 Wide Top Sprockets

    $49.95
    High quality 13 wide 15 Tooth Internal top sprockets for Ski-Doo sleds 1993-Present. ***Sprockets sometimes may cause a 2-3 day delay in shipping***
  24. HOT
    SALE
    Dayco XTX Extreme Torque Snowmobile Belts Dayco XTX Extreme Torque Snowmobile Belts

    Dayco XTX Extreme Torque Snowmobile Belts

    $119.95

    $129.95

    • Dayco belts are a great alternative to your expensive stock belt with excellent quality
    • 1 Year manufacturer Warranty
    • Tested at over 12,000 RPM
    • Faster and more consistent throttle response at high speeds
    • Greater secondary acceleration at high RPM
    • Greater secondary acceleration as primary acceleration increases
    • Reduction in slippage during the highest levels of torque
    • Provides better power transfer to the track
    • Better performance during deceleration (more responsive engine braking)
    • Confidence you're covered with a one year manufacturer warranty
    • We recommend using the DAYCO APPLICATION GUIDE before purchasing to ensure proper fit
  25. Ballistic Pull Start Rope

    BMP Ballistic Pull Start Rope

    $24.95

    BMP Ballistic Pull Start Rope

    • Proprietary synthetic material
    • 9000 lb. tensile strength
    • Pulls over high compression or stock motors with ease
    • Comes gray color in a 7 foot length
    • Needs an 8mm guide hole for fitment. Smaller guide holes may be modified with caution.
    • PN: BMP-PSR
Position
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 52 total

  1. 1
  2. 2
  3. 3