IQ 700

Position
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 52 total

  1. 1
  2. 2
  3. 3
  1. The SideKick

    The SideKick

    $130.00

    The SideKick is manufactured of steel and zinc plated to prevent corrosion. These stands are sturdy enough to get any job done, light enough to carry on the road, and nice enough to be an addition for any show display. The SideKick is designed for newer models of different manufactured branded sleds.

    *The SideKick should not be used on four-stroke motors.

    The SideKick is sold as a two component kit that consists of one steering post and one bumper post. The posts are not sold individually.

  2. DAYCO® XTX™ SNOWMOBILE BELT

    DAYCO® XTX™ SNOWMOBILE BELT

    $129.99
      The Dayco XTX snowmobile belt offers::
    • Faster and more consistent throttle response at high speeds
    • Quicker throttle response at mid-speed acceleration
    • Greater secondary acceleration at high RPMs
    • Greater secondary acceleration as primary acceleration increases
    • Reduction in slippage during the highest levels of torque
    • Providing more power to track
    • Better performance during deceleration (more responsive engine braking)
    • Tested and proven reliability at well over 12,000 RPMs
    • Cooler-running temperature than the leading competitors

    This race-tested Dayco XTX belt gives extreme riders the best out-of-the-hole acceleration, throttle response and durability for the ride of a lifetime—every time!

  3. PDP - Snow Flap for Polaris IQ/ Pro RMK/ AXYS

    PDP - Snow Flap for Polaris IQ/ Pro RMK/ AXYS

    $39.99
    • Made from a Low-Density Polyethylene
    • Extra durable for temps of -60° F under stress!
    • Screen printed, NOT A CHEAP STICKER.
    • UV protective ink guaranteed to last.
    • Direct OEM Replacement
  4. HOT
    BMP Girls 2019 Shop Calendar BMP Girls 2019 Shop Calendar

    BMP Girls 2019 Shop Calendar

    $20.00
    • 16 Month BMP Girls Calendar 
  5. 700CFI Bolt-On Performer Kit 2007-2009

    BMP 2007-2009 700CFI Bolt-On Performer Kit

    $1,685.00

    BMP Dragon/IQ/RMK 700 Bolt-On Performer Kit

     

    **Must send pipe for pipe mod**

     

    Stage 1 Part #: 13-304-1 (Retail $1685)

    Stage 2 Part #: 13-304-3 (Retail $2235)

  6. Billet Head Kit for 700 EV CFI

    BMP Billet Head Kit for 700 EV CFI

    $449.95
    • BMP Billet Head Kit for the 700 EV CFI motor
    • Increase cooling capacity for lower running temps which helps maintain peak power
    • Low altitude kits gain 5-6 mid range horsepower and 4-5 peak
    • High altitude kits gain 7-9hp in the mid range, and 5-6 peak
    • No jetting or EFI changes required when just running the head
    • Need replacement dome o-rings? Find them HERE
    • High altitude PN: 04-310H
    • Low altitude PN: 04-310L
  7. Polaris Pipe Mod

    BMP Polaris Pipe Mod

    $250.00
    • Send in your stock pipe for our classic pipe mod!
    • Big gains for the money
    • Excellent gains in horsepower and torque
    • No EFI controller is normally required
    • Normally you want to add 2 grams heavier clutch weight or use one of our Stage 2 kits for optimum performance
    • Pipe is sand blasted then re-painted. You may choose to have the pipe ceramic coated also.
    • 2-3 week turnaround time
    • Must remove all heat shielding
    • Either print a copy of your online receipt, or send in a copy of this Work Order Form.
    • Send it to: Bikeman Performance Plus 920 Pine Street Saint Croix Falls, WI 54024
    • Need new exhaust springs? 1.8" springs / 2.5" springs
  8. 600/700CFI Full Velocity Muffler 2005-11

    BMP 2005-11 600/700 CFI Full Velocity Muffler

    $269.95

    Fits all 2005-11 600/700 CFI models for Dragon Chassis.

     

    Black PN: 02-315

    Ceramic PN: 02-315-C

  9. HOT
    BMP 2005-11 600/700 CFI Powder Lite Muffler 600/700 CFI Powder Lite Muffler 2005-11 Black

    BMP 2005-11 600/700 CFI Powder Lite Muffler

    $269.95

    Fits all 2005-11 600/700 CFI models for Dragon Chassis.

    No returns due to loud or undesirable sound.

     

    Black PN: 02-315PL

    Ceramic PN: 02-315PL-C

  10. 1.8 Inch Exhaust Spring - 5 Pack

    BMP 1.8 Inch Exhaust Spring - 5 Pack

    $5.00
    • 1.8" Springs work in many applications
    • Recommended for anyone installing exhaust parts on a machine over 1 year old
    • Stealth black.... why not have a cool looking exhaust spring?
    • Ideal for ATV & UTV exhaust, snowmobile mufflers & pipes
    • Part #: BMP-ES1
  11.  2.5 Inch Exhaust Spring - 5 Pack

    BMP 2.5 Inch Exhaust Spring - 5 Pack

    $5.00
    • 2.5" Springs work in many applications
    • Recommended for anyone installing exhaust parts on a machine over 1 year old
    • Stealth black.... why not have a cool looking exhaust spring?
    • Ideal for ATV & UTV exhaust, snowmobile mufflers & pipes
    • This spring is mostly used between your snowmobile y-pipe and single pipe
    • Part #: BMP-ES2
  12. Ultimate Exhaust Spring Puller

    BMP Ultimate Exhaust Spring Puller

    $39.95
    • BMP Ultimate exhaust spring puller should be in every toolbox!
    • 27" in legth to reach even the toughest springs
    • Hardened tip for long tool life
    • Zinc coated
    • Same tool used by our exhaust specialists for years now!
    • Designed to be used for pushing and pulling springs
    • Part #: BMP-USP
  13. HOT
    BMP Polaris IQ Stage 2 Clutch Kits Polaris IQ Stage 2 Clutch Kits

    BMP Polaris IQ Stage 2 Clutch Kits

    $399.95

    BMP Polaris Stage 2 Clutch Kits for 2005-10 IQ chassis with Team TSS-04 secondary clutches.

     

    Low Altitude = 0-3000ft

    High Altitude = 6000+ft

     

    Riding 3000-6000ft trail riding? Use the low altitude setup with 2-3 grams less primary weight. Riding 3000-6000ft mountain/powder? Use the high altitude setup with 2-3 grams more primary weight.

  14. BMP Goldstar Adjustable Snowmobile Clutch Weights Goldstar Adjustable Snowmobile Clutch Weights

    BMP Goldstar Adjustable Snowmobile Clutch Weights

    $229.95
    • Goldstar weights are available for most Arctic Cat & Polaris models.
    • Superior ramp profile gives you the most possible performance
    • A must have to dial in your peak RPM and optimize horsepower to the track
    • Easily adjustable with magnets
    • Place weight where you like it for you're own riding style
    • Zinc plated for a nice looking finish
    • 2004-15 Non bushing Arctic Cat weights come with arms, set screws, magnetic inserts, and an allen wrench for the set screws. These will fit 2004 to 2015 Arctic Cat models without bushings and with set screws (fixed to pin weights)
    •  Polaris and Pre-2004 Arctic Cat Models (ones with bushings) come with arms, magnetic inserts, and an allen wrench These will fit most Polaris models / 2003 and previous Arctic Cat Models.
    • 2016+ Arctic Cat BOSS clutch weights come with 3 arms loaded with bushings and 48 magnets.
    • 2017+ Ski-Doo 850 E-Tec clutch weights come with 3 arms loaded with bushings and 24 magnets
    • Our sheave clamp tool will allow you to add or subtract weight near the tip for fine tuning without removing the weights.
    • For even better performance results, use one of our Stage 2 Clutch Kits tuned just for your machine.
    • Please see drop down menus below for proper model selection.
  15. Polaris Models Primary Clutch Puller

    Primary Clutch Puller for Polaris Models

    $49.95
    • Heavy duty clutch puller - much stronger than many others on the market
    • Fits most Polaris snowmobile models 2000 and newer
    • Fits RZR/Ranger 900/1000 & XP Turbo models
  16. Oil Sleeve Oil Sleeve

    Oil Sleeve

    $19.95

    The Oil Sleeve is designed to stop oil from leaking out of the oil cap due to a warped reservoir neck. The Oil Sleeve installs easily into place. Slight heating of the reservoir neck with a heat gun may be required to install the Oil Sleeve.

     

    Fits: Ski Doo XP, Rev, ZX, CK, F and S chassis; Arctic Cat Crossfire, M-Series and Sno Pro Chassis; Polaris Edge, IQ, RMK, SKS, Switchback, Rush, Indy, Fusion, Evolved and Aggressive Chassis.

     

    Part #: BMP-OS

  17. Polaris 600/700/800 CFI V-Force 3 Reed Cages

    V-Force 3 Reed Cages for Polaris 600/700/800 CFI/HO

    $258.00
    Moto Tassinari introduces the new VForce3R for the Polaris Twin 600/700/800 CleanFire Injection (HO CFI) engines. The VForce3R was designed, developed and tested in close conjunction with Polaris Industries to ensure the very best in both performance and reliability. Unique to the VForce3R is the rubber over-molding on the reed tip surfaces of the reed cage. This allows the use of an ultra responsive reed petal, while also drastically enhancing reed petal life.
  18. POD 300 Digital Display for Power Commander 5 POD 300 Digital Display for Power Commander 5

    POD 300 Digital Display for Power Commander 5

    $249.95
    Features

    • Real time fuel adjustments
    • Display channels real-time: RPM, TP, map position (when using map switch), duty cycle, fuel change, speed, pressure, ignition change & wideband air/fuel ratio- (w/WB2 or AutoTune connected)
    • Weather resistant for use in all conditions
    • Log channels saved to internal memory and can be viewed / analyzed with Dynojet’s PowerCore Software
    • High contrast display, visible in direct sunlight
    • 3 Programmable light alarms
  19. Power Commander 5 Snowmobile EFI Control Box Power Commander 5 Snowmobile EFI Control Box

    Power Commander 5 Snowmobile EFI Control Box

    $399.95
    • Available for many different snowmobile models
    • Gives you full EFI tuning capabilities
    • Easily adjust fueling yourself from any windows computer
    • Input points at 10 throttle positions and in 250 rpm increments
    • Optimizes performance and fuel economy
    • Easy hook up with OEM style connectors
    • Looking to tune while you ride? The POD-300 accessory will allow you to view fuel changes in the area where you are riding, throttle position, and more. This will also allow you to make fuel adjustments in the low/medium/high portions of the fuel map on the fly.
    • FREE BMP custom maps available **For BMP Products ONLY**
    • Please select below if you would like a map loaded into your PC5. Then list your machine, model year, riding elevation along with any engine, exhaust, or intake modifications. Maps are only available for those with BMP Products. Power Commanders loaded with maps will have a BMP sticker on the outside of the box labeled with the map. 
  20. BMP Offset Timing Keys Offset Timing Keys

    BMP Offset Timing Keys

    $20.95
    • BMP Advanced Timing Keys
    • Read full description below before purchasing
    • Small 1.3 Degree PN: BMP-TK1
    • Small 2.6 Degree PN: BMP-TK2
    • Small 4 Degree PN: BMP-TK3
    • Large 1.25 Degree PN: BMP-TK4 
    • Large 2.5 Degree PN: BMP-TK5
    • Large 3.75 Degree PN: BMP-TK6
    • Large 5 Degree PN: BMP-TK7
    • Polaris 1 Degree PN: BMP-TK8
    • Polaris 2 Degree PN: BMP-TK9
    • Polaris 3 Degree PN: BMP-TK10
  21.  Professional 2 Stroke Cylinder Porting

    BMP Professional 2 Stroke Cylinder Porting

    $350.00

    BMP Professional Cylinder Porting - Price per cylinder

    If purchasing online please send a printed copy of your invoice with your cylinders and exhaust valves. If you order other parts with your porting, your order will be sent as soon as your cylinders are completed unless you specify otherwise.

    Use this Work Order Form when sending us parts.

     

    • Accurately precise, highest quality hand porting in the industry
    • Over 30 years of experience
    • Pump gas reliable trail porting
    • Proven race porting
  22. Wossner 2-Stroke Snowmobile Piston Kits

    Wossner 2-Stroke Snowmobile Piston Kits

    $99.95

    ***Please select drop down menu for accurate pricing****

     

    Wossner pistons are German made to the highest standards in the industry! Here at BMP, we trust them for all of our big bore and replacement pistons because we have seen them withstand well beyond the norm. We believe these are truly the best forged piston on the market, and so will you! Please select your model from the drop down list for accurate pricing.

     

    Most piston kits include 1 piston, 1 wristpin, circlips, and rings. For twin motors order Qty 2, for triples order Qty 3.

     

    Actual piston kit may differ from the picture. Looking for gaskets? BMP Sells Cometic top end gasket kits which can be found under your model snowmobile, or the "engine kits" section. 

  23. Polaris 3/4 Hyvo Bottom Sprockets

    Polaris 3/4 Hyvo Bottom Sprockets

    $69.95
    High quality Polaris 3/4" Hyvo Bottom Sprockets ***Sprockets sometimes may cause a 2-3 day delay in shipping***
  24. Polaris 3/4 Hyvo Top Sprockets

    Polaris 3/4 Hyvo Top Sprockets

    $49.95
    High quality 3/4" Hyvo Sprockets ***Sprockets sometimes may cause a 2-3 day delay in shipping***
  25. Polaris 3/4 Hyvo Chains

    Polaris 3/4 Hyvo Chains

    $99.95
    High quality 3/4" Wide Borg Warner Silent Chains for Polaris Models ***Chains are normally not a stocked item and may cause a 2-3 day delay in your order shipping***
Position
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 52 total

  1. 1
  2. 2
  3. 3