CFR/M 600

Position
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 64 total

  1. 1
  2. 2
  3. 3
  1. BMP Arctic Cat 2005-Up Torsion Secondary Spring Tool BMP Arctic Cat 2005-Up Torsion Secondary Spring Tool

    BMP Arctic Cat 2005-Up Torsion Secondary Spring Tool

    $20.00
    • Have a BMP Torsion kit? Then you need this easy to use tool! 
    • Works on all 2005-Up Arctic Cat secondary clutches with BMP torsion conversion kit
    • Part #: 05-104
  2. The SideKick

    The SideKick

    $130.00

    The SideKick is manufactured of steel and zinc plated to prevent corrosion. These stands are sturdy enough to get any job done, light enough to carry on the road, and nice enough to be an addition for any show display. The SideKick is designed for newer models of different manufactured branded sleds.

    *The SideKick should not be used on four-stroke motors.

    The SideKick is sold as a two component kit that consists of one steering post and one bumper post. The posts are not sold individually.

  3. DAYCO® XTX™ SNOWMOBILE BELT

    DAYCO® XTX™ SNOWMOBILE BELT

    $129.99
      The Dayco XTX snowmobile belt offers::
    • Faster and more consistent throttle response at high speeds
    • Quicker throttle response at mid-speed acceleration
    • Greater secondary acceleration at high RPMs
    • Greater secondary acceleration as primary acceleration increases
    • Reduction in slippage during the highest levels of torque
    • Providing more power to track
    • Better performance during deceleration (more responsive engine braking)
    • Tested and proven reliability at well over 12,000 RPMs
    • Cooler-running temperature than the leading competitors

    This race-tested Dayco XTX belt gives extreme riders the best out-of-the-hole acceleration, throttle response and durability for the ride of a lifetime—every time!

  4. HOT
    BMP Girls 2019 Shop Calendar BMP Girls 2019 Shop Calendar

    BMP Girls 2019 Shop Calendar

    $20.00
    • 16 Month BMP Girls Calendar 
  5. F8 Big Bore for F/M/X-Fire 600/700

    BMP F8 Big Bore for F/M/X-Fire 600/700

    $1,549.95

    600cc models will require purchasing the cylinders and exhaust valves outright. This is because the 600 cylinder cannot be bored to the 800, only the 700 cylinder can be bored. $700 is added to the kit for these models, and it is not required for you to send in your cylinders or exhaust valves.


    F/M/X-Fire 700cc models will require your cylinders and exhaust valves to be sent in for exchange.

    Use this form when sending in engine work:BMP WORK ORDER FORM

  6. BMP 2003-04 F/M/CFR 600 Bolt-On Performer Kit

    BMP 2003-04 F/M/CFR 600 Bolt-On Performer Kit

    BMP F/M/CFR 600 Bolt-On Performer Kit.

     

    Stage 1 PN: 13-101-1 (Retail $875)

    Stage 2 PN: 13-101-2 (Retail $1325)

    Stage 3 PN: 13-101-3 (Retail $1875)

  7. F/M/CFR 600 Bolt-On Performer Kit 2005-11

    BMP 2005-06 F/M/CFR 600 Bolt-On Performer Kit

    $1,015.00

    BMP F/M/CFR 600 Bolt-On Performer Kit.

     

    Stage 1 PN: 13-102-1

    (Retail $1015)

    Stage 2 PN: 13-102-2

    (Retail $1465)

    Stage 3 PN: 13-102-3

    (Retail $2015)
  8. BMP M/X-Fire 600/700 Stealth Single Pipe M/X-Fire 600/700 Stealth Single Pipe Black

    BMP M/X-Fire 600/700 Stealth Single Pipe

    $399.95

    All of these pipes come with a pipe sensor port and include a block off plug. This is so they will work on all year machines with or without the pipe temp sensor. 

     

    Black PN: 01-103

    Ceramic PN: 01-103-C

  9. Ultimate Exhaust Spring Puller

    BMP Ultimate Exhaust Spring Puller

    $39.95
    • BMP Ultimate exhaust spring puller should be in every toolbox!
    • 27" in legth to reach even the toughest springs
    • Hardened tip for long tool life
    • Zinc coated
    • Same tool used by our exhaust specialists for years now!
    • Designed to be used for pushing and pulling springs
    • Part #: BMP-USP
  10.  2.5 Inch Exhaust Spring - 5 Pack

    BMP 2.5 Inch Exhaust Spring - 5 Pack

    $5.00
    • 2.5" Springs work in many applications
    • Recommended for anyone installing exhaust parts on a machine over 1 year old
    • Stealth black.... why not have a cool looking exhaust spring?
    • Ideal for ATV & UTV exhaust, snowmobile mufflers & pipes
    • This spring is mostly used between your snowmobile y-pipe and single pipe
    • Part #: BMP-ES2
  11. 1.8 Inch Exhaust Spring - 5 Pack

    BMP 1.8 Inch Exhaust Spring - 5 Pack

    $5.00
    • 1.8" Springs work in many applications
    • Recommended for anyone installing exhaust parts on a machine over 1 year old
    • Stealth black.... why not have a cool looking exhaust spring?
    • Ideal for ATV & UTV exhaust, snowmobile mufflers & pipes
    • Part #: BMP-ES1
  12. HOT
    Stage 2 Diamond Drive Clutch Kit

    BMP Stage 2 Diamond Drive Clutch Kit

    $439.95
    • This Stage 2 clutch kit fits 2004-2011 Diamond Drive snowmobiles
    • Uses a torsion spring conversion kit in the secondary for optimum performance
    • Amazing all around performance gains for just a clutch kit
    • Wicked acceleration
    • 4-8mph top end speed gains
    • Much quicker backshifting
    • More efficientally transfers power to the track
    • Better belt life
    • Many see better fuel milage with this kit (less throttle to cruise at the same speed)
    • Holds RPM much better in deep snow conditions
    • Custom tuned for your sled and modifications
    • Adjustable weights to dial in your setup
    • Adjustable secondary spring tension for those that like to tune
    • Reverse will be finicky on 2009-Up models with engine reverse. (Going forward performance is worth it!)
    • Kit Includes: Torsion conversion kit, helix, secondary spring, primary spring, & Goldstar adjustable magnetic weights
    • For easier installation and adjustment of the secondary, use our 3 finger spring tool
    • Please select your model below
  13. Complete Diamond Drive Torsional Conversion Kit

    BMP Complete Diamond Drive Torsional Conversion Kit

    $249.95

    BMP Complete Torsional Conversion Kit for Diamond Drive Arctic Cats

     

     

    Part #: BMP-CTCK

  14. BMP Diamond Drive Quick Click Torsional Conversion Kit Diamond Drive Quick Click Torsional Conversion Kit

    BMP Diamond Drive Quick Click Torsional Conversion Kit

    $119.95

    BMP Quick Click Torsional Conversion Kit

     

    Part #: BMP-TCK

  15. BMP Goldstar Adjustable Snowmobile Clutch Weights Goldstar Adjustable Snowmobile Clutch Weights

    BMP Goldstar Adjustable Snowmobile Clutch Weights

    $229.95
    • Goldstar weights are available for most Arctic Cat & Polaris models.
    • Superior ramp profile gives you the most possible performance
    • A must have to dial in your peak RPM and optimize horsepower to the track
    • Easily adjustable with magnets
    • Place weight where you like it for you're own riding style
    • Zinc plated for a nice looking finish
    • 2004-15 Non bushing Arctic Cat weights come with arms, set screws, magnetic inserts, and an allen wrench for the set screws. These will fit 2004 to 2015 Arctic Cat models without bushings and with set screws (fixed to pin weights)
    •  Polaris and Pre-2004 Arctic Cat Models (ones with bushings) come with arms, magnetic inserts, and an allen wrench These will fit most Polaris models / 2003 and previous Arctic Cat Models.
    • 2016+ Arctic Cat BOSS clutch weights come with 3 arms loaded with bushings and 48 magnets.
    • 2017+ Ski-Doo 850 E-Tec clutch weights come with 3 arms loaded with bushings and 24 magnets
    • Our sheave clamp tool will allow you to add or subtract weight near the tip for fine tuning without removing the weights.
    • For even better performance results, use one of our Stage 2 Clutch Kits tuned just for your machine.
    • Please see drop down menus below for proper model selection.
  16. Arctic Cat 1996-2009 Models Primary Clutch Puller

    Primary Clutch Puller for Arctic Cat 1996-2009 Models

    $49.95
    • Heavy duty clutch puller much stronger than many others on the market
    • Fits 1996-2009 Arctic Cat models
    • Will not fit 2007-11 1000cc or 1100cc models
  17. Oil Sleeve Oil Sleeve

    Oil Sleeve

    $19.95

    The Oil Sleeve is designed to stop oil from leaking out of the oil cap due to a warped reservoir neck. The Oil Sleeve installs easily into place. Slight heating of the reservoir neck with a heat gun may be required to install the Oil Sleeve.

     

    Fits: Ski Doo XP, Rev, ZX, CK, F and S chassis; Arctic Cat Crossfire, M-Series and Sno Pro Chassis; Polaris Edge, IQ, RMK, SKS, Switchback, Rush, Indy, Fusion, Evolved and Aggressive Chassis.

     

    Part #: BMP-OS

  18.  F/M/CFR 6/700 Carb, All 800-900 Carb Boyesen Rage Cages

    Boyesen Rage Cages for F/M/CFR 6/700 Carb, All 800-900 Carb

    $274.95

    Gain much quicker throttle response, excellent bottom end power and 2-3 peak horsepower with these Boyesen Rage Cages! Known as the longest lasting aftermarket reed around, there is no need to look any further! 

     

    This cage fits carb models only.

     

    Part Number:  BY-RAD51-2

  19. F/M/CFR 500/600/700/800 EFI & ZR/ZL 800/900 EFI Boyesen Arctic Cat Rage Cages

    Boyesen Arctic Cat Rage Cages for F/M/CFR 500/600/700/800 EFI & ZR/ZL 800/900 EFI

    $289.95

    Gain much quicker throttle response, excellent bottom end power and 2-3 peak horsepower with these Boyesen Rage Cages! Known as the longest lasting aftermarket reed around, there is no need to look any further! 

     

    Part Number: BY-RAD51C-2

  20. Arctic Cat F/M/X-Fire 6/7/800 & ZR/ZL 800/900 V-Force 3 Reed Valves

    V-Force 3 Reed Valves for Arctic Cat F/M/X-Fire 6/7/800 & ZR/ZL 800/900

    $258.00
    • Fits Arctic Cat F/M/X-Fire 6/7/800, M500 & ZR/ZL 800/900
    • Double the reed tip surface over a conventional reed valve design
    • Increased bottom end, stronger mid-range and longer top-end
    • Greater efficiency due to reduced reed petal travel
    • More airflow means more horsepower
    • Reduced reed petal wear
    • Screw free design eliminates risk of screws going through motor
    • Screw free design enables super quick reed petal changes
    • Part #: VF-V3112-873B-2
  21. POD 300 Digital Display for Power Commander 5 POD 300 Digital Display for Power Commander 5

    POD 300 Digital Display for Power Commander 5

    $249.95
    Features

    • Real time fuel adjustments
    • Display channels real-time: RPM, TP, map position (when using map switch), duty cycle, fuel change, speed, pressure, ignition change & wideband air/fuel ratio- (w/WB2 or AutoTune connected)
    • Weather resistant for use in all conditions
    • Log channels saved to internal memory and can be viewed / analyzed with Dynojet’s PowerCore Software
    • High contrast display, visible in direct sunlight
    • 3 Programmable light alarms
  22. Power Commander 5 Snowmobile EFI Control Box Power Commander 5 Snowmobile EFI Control Box

    Power Commander 5 Snowmobile EFI Control Box

    $399.95
    • Available for many different snowmobile models
    • Gives you full EFI tuning capabilities
    • Easily adjust fueling yourself from any windows computer
    • Input points at 10 throttle positions and in 250 rpm increments
    • Optimizes performance and fuel economy
    • Easy hook up with OEM style connectors
    • Looking to tune while you ride? The POD-300 accessory will allow you to view fuel changes in the area where you are riding, throttle position, and more. This will also allow you to make fuel adjustments in the low/medium/high portions of the fuel map on the fly.
    • FREE BMP custom maps available **For BMP Products ONLY**
    • Please select below if you would like a map loaded into your PC5. Then list your machine, model year, riding elevation along with any engine, exhaust, or intake modifications. Maps are only available for those with BMP Products. Power Commanders loaded with maps will have a BMP sticker on the outside of the box labeled with the map. 
  23. Arctic Cat Adjustable Fuel Pressure Regulator

    BMP Arctic Cat Adjustable Fuel Pressure Regulator

    $159.95

    BMP Arctic Cat Adjustable Fuel Pressure Regulator.

     

    Part #: BMP-FPR

  24. Inline Fuel Reducer

    BMP Inline Fuel Reducer

    $89.95

    BMP Inline Fuel Reducer with Gauge.

     

    Part #: BMP-IFR

     

    Download the instructions here

  25. Winderosa 2-Stroke Top End Gasket Kits

    Winderosa 2-Stroke Top End Gasket Kits

    $52.95
    • High quality top end gasket sets made by Winderosa meet or exceed the OEM specs. We recommend using new gaskets any time you tear your top end apart 
    • Actual product may vary from picture.
    • Please select your model from the drop down menu below
Position
Set Descending Direction

Grid List

25 per page

Items 1 to 25 of 64 total

  1. 1
  2. 2
  3. 3